管道液位传感器
|
|
RJ-U 系列TEOPTO管道液位传感器可透过非金属容器壁探测液体，液体材料的电解质越大，传感器的检测就越稳定。 |
1、选型表 (8mm-13mm PRODUCTS LIST)
 |
 |
NPN型 | |
| 常开 | RJ-U13N1 | ||
| 常闭 | RJ-U13N2 | ||
| PNP型 | |||
| 常开 | RJ-U13P1 | ||
| 常闭 | RJ-U13P2 | ||
技术参数 (Technical parameters )
| DC | ||
|---|---|---|
| 适用管道 | Applicable pipes | φ8～11 mm |
| 检测物体 | Detection of objects | 液体 |
| 供电电压 | Service voltage | 10 ... 30 V DC |
| 分辨率 | Resolution | - |
| 输出 | Output | pnp or npn ; NO or NC |
| 灵敏度调节 | Sensitivity adjustment | 电位器/Potentiometer |
| 最大额定输出电流 | Maximum rating | 100 mA |
| 静态电流 | Internal power consumption | < 12 mA |
| 电压降 | Voltage drop | < 2,0 V |
| 绝缘阻抗 | Insulation resistance | ≥50MΩ(500VDC) |
| 环境温度间 | Ambient temperature | -10 ... +55°C |
| 环境湿度 | environment humidity | 35-95% |
| 功能显示 | Function Display | 黄色 LED ; YELLOW LED |
| 外壳材质 | shell material | PBT |
| 防护等级 | Protection class | IP67 |
| 电缆 | Cable | 2 M / 3-wires |
2、选型表 (12mm-26mm PRODUCTS LIST)
 |
 |
NPN型 | |
| 常开 | RJ-U26N1 | ||
| 常闭 | RJ-U26N2 | ||
| PNP型 | |||
| 常开 | RJ-U26P1 | ||
| 常闭 | RJ-U26P2 | ||
技术参数 (Technical parameters )
| DC | ||
|---|---|---|
| 适用管道 | Applicable pipes | φ12～26 mm |
| 检测物体 | Detection of objects | 液体 |
| 供电电压 | Service voltage | 10 ... 30 V DC |
| 分辨率 | Resolution | - |
| 输出 | Output | pnp or npn ; NO or NC |
| 灵敏度调节 | Sensitivity adjustment | 电位器/Potentiometer |
| 最大额定输出电流 | Maximum rating | 100 mA |
| 静态电流 | Internal power consumption | < 12 mA |
| 电压降 | Voltage drop | < 2,0 V |
| 绝缘阻抗 | Insulation resistance | ≥50MΩ(500VDC) |
| 环境温度间 | Ambient temperature | -10 ... +55°C |
| 环境湿度 | environment humidity | 35-95% |
| 功能显示 | Function Display | 黄色 LED ; YELLOW LED |
| 外壳材质 | shell material | PBT |
| 防护等级 | Protection class | IP67 |
| 电缆 | Cable | 2 M / 3-wires |
| 电气连接图: | 返回↑ |
 |
 |
